VCI Specialty Solutions

VCI Specialty Solutions

VCI solutions are used in metal processing applications such as a lubricant, wash, final rinse, protection of closed systems (boilers, tanks, piping), and general metalworking purposes.

Nox-Rust 5400

The anti-rust solution is a rust-preventive oil incorporated with petroleum additives. Used as a wash, the oil leaves a lubricant and corrosion-preventive film without interfering with assembly sealers, adhesives, painting, welding, and cleaning solutions. Conventional cleaning methods can be used to remove the oil easily. It is also approved as a lubricant/preservative on sheet and coil sheets by major automotive manufacturers.

  • Protection Time: 1-2 years indoors; 3-6 months outdoors protected
  • Appearance: Light oily and waxy
  • Metal Protection: Cold rolled steel, sheet metal stamping, automotive parts
  • Also available in convenient 11 oz. aerosol spray
Nox-Rust 7100

A general-use water-displacing stamping oil, the anti-rust solution can be used in any plant operation with a stamping operation that uses water-base cutting fluids. Protect against rust with springs, machine tools, compressors, gears, driveshafts, precision parts, watch components, taps, and drills.

The transparent oil repels residual cutting fluids and will not clog stamping dies; it is also non-staining. To apply the oil, users can dip, spray or brush. After applying, the oil dries to a soft dry film barely noticeable, except for the sparkling lustre it puts on treated metal.

  • Protection Time: 3-6 months indoor
  • Appearance: Light, transparent, oily, dries to a transparent, non-discernible film
  • Metal Protection: Multi-metals
  • Approvals: OEM product
  • Also available in convenient 11 oz. aerosol spray
Nox-Rust 7800

The anti-rust solution protects both ferrous and non-ferrous parts during storage. It covers transit at a low film thickness with water-displacing, low-viscosity lubricant and a corrosion prevention solution. No mixing or preparation is required, and it is compatible with barium lube grease while functioning as an excellent lubricating oil for assembly parts.

Remaining in a liquid state, even at -70°F, makes the solution applicable in the military, such as gun oil for firearms in cold climates. The lubricant is also ideal in transit and transportation industries, machined parts and even routine maintenance shop use. It can penetrate very tight and hard-to-reach areas.

Known as the top all-purpose lubricant, the anti-rust lubricant provides temporary corrosion protection and can un-seize a stubborn nut to keep machines running smoothly. To use the lubricant, apply by spray, dip or brush. If removal is required, users can use mineral spirits, high-pressure steam or hot alkaline wash.

  • Protection Time: up to 12 months indoor
  • Appearance: Light, oily film
  • Steel, metalworking and precision parts
  • Ferrous and non-ferrous metal protection
Nox-Rust 9300

The anti-rust solution is an all-purpose, water-displacing corrosion inhibitor additive for final stage rinse. It prevents corrosion during the shipment and storage of machined parts, tools, treated steel, and assembles. The solution can be diluted with water petroleum solvent and applied by dip, spray or brush.

  • Protection Time: 3-9 months indoor
  • Appearance: Light, transparent liquid, dries to a thin, oily emulsion
  • Metal Protection: Steel
Nox-Rust 9700

The anti-rust solution is a synthetic, water-based rust preventive designed as a final and in-process RP additive. Removes dirt and debris from steel before mill oils are applied. Add to cutting fluids, metalworking fluids, or final stage rinse. It is also water-displacing and is compatible with zinc and copper.

  • Protection Time: Limited indoor 1-12 weeks
  • Appearance: Straw-coloured, clear, aqueous solution that dries to a thin, soft film
  • Metal Protection: Steel
  • Approvals: OEM product

Enquire About Product